Show or Hide

Watts Radiant | Floor Heating & Snow Melting

HeatWeave | Feel Radiant On A HeatWeave Floor!

Watts Radiant | TapeMat™

Watts Radiant TapeMats are the safest and easiest-to-install heating mat in the industry. It is Listed by UL® for the U.S. and Canada, and tested by Tile Council of America for all residential and moderate commercial applications. All mats have the "S-pattern" wire construction and produce 12 watts/sq. ft. Watts Radiant offers the largest selection of mats in the industry with over 40 sizes manufactured in lengths covering up to 180 sq. ft. - with one mat!

Installation Videos

Consider The Benefits...

  • The industry's first thin, open-weave construction allows thin-set or self-leveling mortar to flow through the mat and easily bond with the underlying material. This one-step application adds only 1/8" thickness over a normal tile installation.
  • The industry's first single power lead construction makes mats easy to install and simpler to connect to the control.
  • The industry's highest-quality heating wire using ETFE high-temperature insulation, PEX jacket, and oxygen-free copper alloys for corrosion resistance, temperature resistance, abrasion resistance, and longevity.
  • The industry's first twin-wire construction means ultra-low EMF.
  • 120-VAC and 240-VAC models available for small residential to large commercial applications.
  • The industry's only shielded and fully grounded 10-ft. power lead provides safety and jobsite durability (longer lengths available on request). Power leads are color-coded for 120 VAC or 240 VAC.

Heated floors, the easy way

  • Order mat for your exact floor plan.
  • Simply unroll to fit the space.
  • No cuts or turns required.

Features & Benefits

  • Quicker, simpler, easier installation - Custom TapeMat® is pre-shaped to fit any area.
  • Open weave TapeMat® allows for a 1-step application with thin-set or self-leveler.
  • Easy alterations if room dimensions change.
  • Simple to adjust for curves, angles, & cut-outs.
  • Double-sided tape adheres to subfloor for faster layouts.
  • UL listed at 12 Watts/square foot.

Installation is as easy as...

  1. Step 1

    Plan Your Room

    Measure and sketch the room you plan to warm. Choose the best place for your thermostat, what areas you want to warm and how many mats you will need. Heat 85-90% of open floor, staying 4-6 inches away from walls and built-ins.

  2. Step 2

    Layout Mats

    Roll out the mats according to your sketch and fasten them to the subfloor using the 2-sided tape. Mount your thermostat and place the temperature sensor between any two heating wires.

  3. Install Floor

    Cover mats with a cement based mortar, let it cure, then install your floor covering. If you are installing tile, you can install the tile when you apply the mortar. Connect mat power leads to your thermostat in parallel.

Back to top